|
|
  |
St. Steel - Indexing plungers |
GN 617 |
| Type A without lock nut, with knob | Type G without lock nut, with threaded rod |
| Type AK with lock nut, with knob | Type GK with lock nut, with threaded rod |
| d1 | d2 | d3 | d4 | e | l1 ~ | l2 | l3 | l4 | l5 | l6 | A/F | Spring load N~ | |
| Plunger -0,02 -0,04 Bore H7 |
min. | min. | initial | end | |||||||||
| 5 | M 10 x 1 | 21 | M 5 | 13,8 | 45 | 5 | 17 | 5 | 6 | 15 | 12 | 5,5 | 12,5 |
| 6 | M 12 x 1,5 | 25 | M 6 | 16,2 | 54,5 | 6 | 20 | 6 | 10 | 17 | 14 | 5 | 11 |
| 8 | M 16 x 1,5 | 31 | M 8 | 21,9 | 69 | 8 | 26 | 8 | 12 | 23 | 19 | 11 | 26 |
| 10 | M 20 x 1,5 | 31 | M 8 | 25,4 | 80 | 10 | 33 | 10 | 12 | 30 | 22 | 23 | 54 |
| Specification | Information | How to order |
| Stainless Steel (NI) German Standard No. 1.4305 Plunger Knob |
Indexing plungers GN 617, type G or GK with threaded
plunger end are for applications where a special knob to customers' own
de-sign is required or for such cases where the spindle is linked direct
to an operating mechanism.
When being in the end position (spring is "on block") the indexing plungers are constructed in such a way that also axial loads can be applied through the operator via knob are higher (type G) additional informations can be submitted on request. St. Steel-Indexing plungers GN 613 St. Steel-Indexing plungers GN 617.1 |
St. Steel- Indexing plunger GN 617-8-AK-NI Code No. 617 |
|
|