homepageproduct overviewoverview group 2.7 gaiters gn 808.1angled ball joints gn 71802




  
Fork head DIN 71752
Fork joints

GN 751


Type A fork pin with circlip Type B fork pin with snap-on spring *)
d1 l1   d2     a b d3 l2   l3   l4
H8/h9       Left Fine thread                
        hand                  
        thread                  
                           
*) 4 8 16 M 4 � M 4L 8 4 8 16 24 21 29 6
5 10 20 M 5 M 5L 10 5 9 20 30 26 36 7,5
6 12 24 M 6 M 6L 12 6 10 24 36 31 43 9
                         
8 16 32 M 8 M 8L M 8F=M 8x1 16 8 14 32 48 42 58 12
10 20 40 M 10 M 10L M 10F=M 10x1,25 20 10 18 40 60 52 72 15
12 24 48 M 12 M 12L M 12F=M 12x1,25 24 12 20 48 72 62 86 18
                         
14 28 56 M 14 M 14L M 14F=M 14x1,5 28 14 24 56 85 72 101 22,5
16 32 64 M 16 M 16L M 16F=M 16x1,5 32 16 26 64 96 83 115 24
*) 20 40 M 20 M 20L 40 20 34 80 105 30
Specification Information How to order
Steel

zinc plated, blue passivated

Circlip DIN 471
zinc plated

*) These fork joints are available in type A only.

Fork joints GN 751 consits of a fork head according DIN 71752 and a fork pin with circlip DIN 471 (Type A) or a fork pin with snap-on spring (Type B).

Size d1 = 12 is supplied with a fine thread M12x1,5 according to DIN. In practice, however, M12x1,25 is preferred.

DIN 71752 does not foresee size d1 = 20.

Fork joints GN 751 made of St. Steel on request.

Fork joints
GN 751-10-20-M10-B

Code No. 751
d1 10
l1 20
d2  M10
Type B


Fork head without spring
DIN 71752-10-40-M10L

Code No. 71752
d1 10
l1 40
d2 M10L

The sizes and types marked with � are normally not stocked, but they are available subject to a minimum order quantity.



Fork joints GN 751, select, inquiry, order, CAD downloadgaiters gn 808.1angled ball joints gn 71802